CISCO Switches ♦ CISCO WS-C3550-24-SMI - Has a console port on the back. (No USB port).

[Cisco Index] [TPR Instructions]

[Putty Instructions]

Hold down Mode button while powering on (until system LED stops flashing) then it should show: "Switch:"

Type: flash_init then dir flash: for directory tree. Look for config.text = this means there is a config on the switch.

delete everything (Except .bin and multiple fs) delete flash:(Name of file you are deleting).

Type 'Boot' - to boot the switch. once booted then onto enable then dir

Type No to config dialog. switch> en switch#

sh startup-config (Shouldn't be there). sh ver sh env all

sh vlan

Remember to get all the ports in the VLAN. Test all ports on the switch by plugging a network lead into each and it should say port is up.

Clear Logging   - Clears Log. 
show start      = shows startup config. 
sh ver          - Shows version.
show env all        = shows environment (temperatures etc).

==Parts== http://wiki.nesevo.com/index.php/Internal_Power_supply_partnumbers_for_cisco_catalyst_switches Power Supply = 34-0966-02 C3550-24-SMI PSU = CISPSU-3107

==Jobs Done==.. - 2045352 O2OROU-3006 CISCO WS-C3550-24-SMI FSK L20 1 please escalate through the workshop 01/12/2014 09:47:19. Switch is dead. Replaced faulty capacitors on the power supply, however still not powering on. Looks to need a WS-C3550-24-SMI 34-0966-02. SN: CAT0807N02T AS6 Partcode O2OROU-3006 (Qty:1) loaded to Workshop on Movement Ref 1561973 i.e. CISCO WS-C3550-24-SMI. Change part code to: CISSWT-3154

[Cisco Index] search this site