Instructions for guests on how to use the Finnish tub
(translated from Italian with Google Translate)
Dear guest, below you will find some instructions on how to use our Tinozza safely:
- when you want to bathe in the tub, first remove the lid (better if made in two) and place it gently, as shown in the photo, on the special black cushion near the net
- FUNDAMENTAL rule: check that the water level is above the nozzle indicated in the photo
If the water level is below the indicated level, call the host and wait to bathe but, above all, do not turn on the stove
- the water in the tub has already been treated and purified with a filter that checks its cleanliness. If you find leaves or insects on the surface of the water (...we are in the countryside) remove them with the net hanging on the wall
- the water temperature (reported by the meters inside the tub) must be between 35 degrees and not more than 40 degrees. If it is lower than 35 degrees you can light the stove and put a piece of wood. In half an hour with the wood you can bring the temperature to 35 and not more than 40 degrees.
- when the temperature is the desired one (never more than 40 degrees) it is time to bathe. Please enter carefully without bringing stones or leaves into the water with your feet.
- if you want, you can activate the hydromassage by pressing the silver button (please remember, it is the only button to use)
- after the bath, turn off the hydromassage by pressing the silver button and get out of the tub very carefully so as not to slip,
- do not add more wood to the fireplace,
- when possible, better not after an hour from the bath, close the tub with the lid (better if done by two),
- please, do not touch the stove flue with your bare hands (even when it is not hot)
That's all, enjoy your relaxation!
<=